Bowjest Posted April 7, 2019 Report Posted April 7, 2019 Hi, Chrome auto-updated my Enpass extension to a version that is not compatible with my Enpass installation. This resulted in the extension no longer working in Chrome. I went to the Enpass site and downloaded an earlier version of the extension (5.5.3) and followed the instructions for turning on developer mode in Chrome, but it still doesn't work. I get the errors as shown in the attached screenshot. There are multiple instances of these errors or similar. Is there an earlier version I can use or can someone advise how to get around this problem? Chrome is my main browser, so not having Enpass support is a real pain. Thanks, Bowjest
Anshu kumar Posted April 10, 2019 Report Posted April 10, 2019 Hey @Bowjest Sorry for the troubleshooting you are going through. Please share some more info so that we can help you better. Which OSX version are you using? Which Enpass version are you using? Are you using any Antivirus or third-party security-related extension? Are you using Proxy/Firewall? Thanks for your co-operation.
Bowjest Posted April 11, 2019 Author Report Posted April 11, 2019 Hi Anshu, Sorry for not including that information. I'm using: • OSX version Yosemite 10.10.5 (14F27) • Enpass version 5.6.9 (151) • I have no third-party security-related extensions of any kind installed • I'm not using a proxy or firewall Just to confirm: I can't upgrade to a newer version of Enpass because a newer version isn't compatible with my current installation of OSX. I can't upgrade OSX because this would conflict with apps I need for my work. Everything was working perfectly until Chrome updated/upgraded my Enpass extension to a newer version. This was when the problem started. I really hope this helps. Many thanks in advance for your assistance. Bowjest
Anshu kumar Posted April 12, 2019 Report Posted April 12, 2019 Hey @Bowjest, Thanks for sharing the details. I will really appreciate if you can perform following troubleshooting steps and share the output via support@enpass.io Verify from the 'Activity Monitor' if an executable with the name 'Enpass Helper' is running. If yes, please run this command in the terminal and share the results: lsof -i:10391 Where 10391 is the port number and if there is no output (blank), please try with other port numbers between 10391 to 10395. Thanks for your co-operation.
Bowjest Posted April 12, 2019 Author Report Posted April 12, 2019 Hi Anshu, Thanks for the further advice. I can confirm that the helper agent is running and I have now sent the output of the lsof command to the support address you supplied. Hopefully this can be resolved soon. Best regards, Bowjest
Anshu kumar Posted April 15, 2019 Report Posted April 15, 2019 Hey @Bowjest, Thanks for the update. Our support team will analyze the logs and get back to you soon. Thanks for the co-operation.
Bowjest Posted April 21, 2019 Author Report Posted April 21, 2019 Hi Anshu, It's been a week since I email support about this issue and I've not heard anything. What should I do next? Thanks, Bowjest
Anshu kumar Posted April 22, 2019 Report Posted April 22, 2019 Hey @Bowjest, Sorry, we made you wait this long. I just want to confirm that this issue has already been addressed to the Developers by our support team and I assure you it'll be resolved very soon. Thanks for your co-operation.
Bowjest Posted April 29, 2019 Author Report Posted April 29, 2019 Hi Anshu, It's now been 2 weeks since I emailed support about this issue and I've still not been sent any update or further information. What should I do now? Thanks, Bowjest
Anshu kumar Posted April 30, 2019 Report Posted April 30, 2019 Hey @Bowjest, Please check your inbox we have just shared a new build and share your findings. Thanks!
Bowjest Posted April 30, 2019 Author Report Posted April 30, 2019 Hi Anshu, Thanks for your message. I've checked my inbox and seen the email, but I need confirmation that the version of Enpass the support team is suggesting I use will actually run on my system. I'm on Yosemite and cannot upgrade because of software conflicts. I'm just waiting for a reply from support as to whether the version they would like me to try is compatible with my system. Regards, Bowjest
Anshu kumar Posted May 1, 2019 Report Posted May 1, 2019 Hey @Bowjest, 12 hours ago, Bowjest said: I'm just waiting for a reply from support as to whether the version they would like me to try is compatible with my system. Yes, it is compatible. Please install and share your feedback. Thanks!
Bowjest Posted May 1, 2019 Author Report Posted May 1, 2019 Hi Anshu, Great. I'll get that done today and supply feedback both here and to support. Very much appreciated! Regards, Bowjest
Bowjest Posted May 1, 2019 Author Report Posted May 1, 2019 Hi Anshu, I'm very happy to say that after following the steps outlined by the support team and using the new version of the software and Chrome extension you linked them, everything seems to be working fine again. Thank you very much again for your help. This will make my life so much easier now! Regards, Bowjest 1
Bowjest Posted May 2, 2019 Author Report Posted May 2, 2019 Hi Anshu, Unfortunately, I now find after going through the steps above the Enpass extension for my Firefox browser now no longer works. I'm using Enpass version 5.6.12.(158) Firefox version 65.0.1 (64-bit) I do not have automatic update enabled for Firefox. When clicking on the Enpass extension in my browser toolbar I get the follow page/message: "Enpass Connection Error Please make sure that Enpass desktop application is installed and running, and you have enabled browser extension from Enpass Settings." I uninstalled the extension and installed the newest version, but it is not compatible with my current Enpass installation. I then uninstalled that and went to the Enpass website and installed an older extension from here: https://www.enpass.io/support/where-can-i-download-older-version-of-enpass/ I can confirm that Enpass is running and the extensions for Safari and Chrome work without issue (currently). Can someone please help with this? I can only assume something about the steps I carried out yesterday have caused the problem with my Firefox extension. Regards, Bowjest
Bowjest Posted May 6, 2019 Author Report Posted May 6, 2019 Hi Anshu, I'd really appreciate some help with this as I didn't have any problems with my Firefox extension until I carried out the steps sent to me by the support team. Thanks and Regards, Bowjest
Anshu kumar Posted May 6, 2019 Report Posted May 6, 2019 Hey @Bowjest, We have already notified this issue to the dev team and currently, our dev team is busy in the next major update of Enpass 6.1. Sorry to say but for now, I can't say how much time it will take to fix this issue. So I request you to please use Chrome and Safari until the issue gets resolved. Thanks for your understanding!
Bowjest Posted January 3, 2020 Author Report Posted January 3, 2020 Has there been any progress on this issue? Please supply and update as soon as possible. I now no longer have any browser that works with Enpass and the Enpass extension. Bowjest
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now