Feature requests

Username and password autofill is great, but it breaks on sites (such as for certain security appliances) where the password and OTP have to be entered into the same field. Obviously the work around for this is to not use autofill, but it's only an issue in this particular case. Some options for an improvement might be: A per-entry whitelist that works like a boolean of "copy both password and otp for this site" consisting of the password and otp concatenated together in the clipboard, with option of Password+OTP or OTP+Password, for some schemes where the OTP is required before or after the password proper, A right-click option under "Copy OTP" that allows fo…

A while ago we got the info "Important Update: Generator-Rules are now Passwort-Rules". This might sound good, but it isn't for everybody. We are MSPs and have to cover loads of passwords created by our customers. Now we have to choose between "not being able to generate very good passwords" or "having about 80% of the stored password criticized for being not compliant" - this doesn't make sense. We need to be able to have separate rules - or we need to be able to manually configure the generator to exceed the predefined limits of the rules.

I love Enpass, but I find that very often, the browser autofill popup opens to its "identity" panel, rather than the much more likely to be relevant "login" panel. This can make some users assume there are no saved passwords for the site, or, at the very least, add a little frustration and extra effort to an otherwise seamless experience. Please allow users (or just change the default behavior) to tune the form-matching heuristics so that for two-stage login forms (for instance, forms that require an email or username to be submitted before the password field is presented), the login panel is more likely to appear. Unless a form contains a full name or address field, I do…

Enpass on Windows 11 for ARM crashes a lot; it crashes whenever it uses Windows Hello to unlock Enpass. I use Enpass on multiple x64 versions of Windows 11, and I do not see these crashes. If I change Enpass to use a PIN to unlock, I don't seem to see these crashes, so it appears this is related to Windows Hello. Is this specific to Windows on ARM64? Could we get a natively-compiled version for ARM64? This is on a Lenovo Slim 7x with the CPU: Snapdragon(R) X Elite - X1E78100

I have many logins that apply to multiple websites, for example, an Amazon account is for amazon's shopping site but also Kindle, Prime video, etc. I've found that I often have to add extra website URLs to login entries so that Enpass will associate that entry with that site. But the process is cumbersome. You have to click the plus symbol, name the new field, select the field type as URL, etc. It would be great if Enpass had a simple "plus" button next to the website field that automatically creates additional website fields, with a default name of "Website 2", "Website 3", etc. Thank you.

Hello in my homelab i have a lot of services on my server with the same base ip but lots of different ports. unfortunately enpass shows me all i have saved and it can be confusing which one to use. especially on my phone because i see only the username (often times admin). can you please change that? Regards Jonas

A thread on this topic has existed since 2017, but the Linux Enpass client still uses legacy X11 and does not work properly on Wayland-based distros. As more and more distros switch to Wayland, this is becoming a real problem. https://discussion.enpass.io/index.php?/topic/1134-not-compatible-with-wayland/&_fromLogin=1 Are there plans to address this in a release soon?

Hi Enpass support, Can you please make your website Blog compatible with RSS readers? Personally speaking, I would like to subscribe to get blog updates with an RSS reader, so that I automatically get notified when you share new posts. Hope you can make this happen 🙏

I really like Enpass and have been using it for a long time by now. Something I would really like to see is a native 64-bit version of Enpass. By now Enpass is the only App on my Windows 11 machine that is running in 32-bit. Windows 11 is also the first Windows that is available in 64-bit only. So I was wondering, if there is already a release schedule for such a version or plans about developing such a version?

1password and bitwarden started integrated win11 passkey support. Is there any plan for enpass? https://techcommunity.microsoft.com/blog/windows-itpro-blog/windows-11-expands-passkey-manager-support/4467572

Hi! Could Enpass consider supporting Autofill on macOS? Currently on iOS and iPadOS, you can set Enpass as the designated Autofill app in System Settings, but on macOS, Enpass doesn't appear in the Autofill settings list—only Apple's Passwords is available. I hope Enpass can support this. Thank you! https://www.reddit.com/r/EnpassOfficial/comments/1pylw4j/choose_enpass_in_macos_option_for_set_up_codes_in/ Other users have also mentioned the same issue on Reddit's official channel. If Enpass could be set as the system's sole Autofill provider, it would avoid many conflict scenarios.

I would like to submit a request for consideration under "Tools". It would be great if there was an option to search for duplicate entries: I do not mean just the username and password, but the actual URL. Not sure how I keep doing it, but I manage to create duplicate entries here and there and this would be a great DB cleanup option for users like me. Otherwise, I seriously love this app! I still use it concurrently with LastPass, but have been more rapidly switching to Enpass for daily use. Thanks for the hard work!

Hi team, I recently got one of the new 8GB/RAM Raspberry Pi models and found it to be a quite nice minimal desktop experience. Unfortunately, I couldn't get very far with the tasks I was hoping to, as Enpass doesn't seem to support ARM on Linux yet. I'd love to see an ARM build published in the APT/YUM repos - unless I'm thoroughly mistaken about your codebase, it may be a just as simple as recompiling your current Linux build for ARM. I think over the next few years as we start to see more ARM machines come onto market you'll find more and more developer customers requesting this feature. Some operational suggestions for a smooth QuickStart: AWS…

If you have a password which you access using the "View large feature", the numbers that are shown below the characters are not well-aligned, sometimes causing confusion as to which character is which. For example: Please can you improve this?

It would be really much, much better if the Match URL Hostname was NOT a global setting. I often login into work sites on our company's intranet that ALL have the same domain name with different sub-domains, which all have different passwords. Unfortunately, Enpass, like LastPass and other password managers, match only on the domain name, or have a global setting that makes EVERY site match on the entire URL (which screws up other sites, especially ones that get updated and some part of the URL changes) or make you list the sites elsewhere (like LastPass). It is especially irritating when you have to dig through dozens of sites that all look the same (in a dropdown) to tr…

The Notes field is really small and has lots of space around it that it could "expand" to. If it can't be automatically expanded to fill the space, can you make the textbox frame resizeable so the user can resize it? I often have 20-30 lines of info in the Notes, and it's SO difficult to read data in such a small area! Please consider this request in a future edition.

Team, Per the Title, Is it possible for the Enpass Team to add Proton Drive to the Cloud Sync services? I would love to be able to move my vaults over. Thanks again!!

Hi, Enpass does not have a Print function. But it's possible to export as CSV or Text format. But it's only possible to export all the data of all the items ... including the password as visible text! Exporting all items as text or CSV is a good thing as an exchange / backup solution. But ... Why I want to print? Because printed documents survive to a HD crash/cloud hacking and a document printed in a safe is still a good thing for security. Why do I want to export / print data without a password? Because, sometimes (administrative tasks), I only need the other data. And because I use Enpass to safely manage and hide my passwords... Why do I want to export one or m…

A field with the option to choose one possibility from several options would be very practical. Selection: A B C

Hi, is it possible to add a feature to filter untagged items in "Tags" or "Other"? Thanks.

Hi, There are certain critical passwords that I choose to commit to memory in the unlikely event that someone gains access to my enpass database .e.g. banking. However enpass continually offers to save details after inputting them manually. Can you add an option to no longer ask to save when declining for a specific app? Thanks

Hello together, come on, guys, it's Christmas. Time to make people happy! So please support a coammnd-line interface to get passwords from Enpass. I want to use only one tool.. and this should not be KeePassX. Releates to: December 24, 2018 September 10, 2018 May 3, 2017 November 21, 2017 Thanks and BR Daniel

Just bought a Lenovo laptop with a fingerprint reader that works great for logging in. I would love to be able to use it for Enpass! Happy to be a beta tester or work with the engineers to develop the feature (I'm a programmer)

Hi, When we use stickers to sort passwords; it goes to a point you try to manage that like folders. Unfortunately it's not the case... Yet ? Like this : It would be nice to have some equivalent functions like : * copy into (add sticker). * "move" entries from a sticker to another (replace the X sticker with Y) as it was folders Of course on mobile app it could be tricky to achieve. But on desktop computers. Definitely a must have. Have a nice day.

There is another topic asking for SSH Agent support. Unfortunately, the topic has been already closed without further information whether this will be implemented or not. I would really love to have SSH Agent support in Enpass. My expected behavior of this implementation would be Enpass asking me to unlock the Vault once an SSH Agent request is made (just like auto fill in the browser extension) and then accepting the SSH Agent connection. Is this on the list to be implemented?